Littelfuse , a global leader in circuit protection, today announced the release of its low-capacitance SP3014 series of TVS diode arrays ( SPATM diodes) to protect electronic devices that may experience destructive electrostatic discharge (ESD). The SP3014 series integrates two channels of low capacitance steering diodes and Zener diodes to safely absorb the highest levels of repeated ESD shocks in the IEC61000-4-2 international standard without compromising performance. Compared to similar silicon solutions, the SP3014 series reduces clamping voltage by more than 50%, protecting the most vulnerable integrated circuits from damage or premature failure due to electrical transients. Low load capacitance makes it ideal for protecting high-speed signal lines such as USB 2.0, USB 3.0, and 1Gb Ethernet. Extremely low dynamic resistance keeps transient overvoltages at a safe level, protecting the most sensitive and advanced chipsets from ESD damage or premature failure. Typical applications include ultrabooks, notebook computers, LCD TVs, set-top boxes, Ethernet switches, external hard drives, smartphones, automotive electronics, and more. Chad Marak, director of product lineup for transient suppression diode arrays at Littelfuse , said: "The SP3014 family has a dynamic resistance of 0.04?, providing circuit and hardware designers with highly optimized clamping devices that protect the most sensitive integrated circuits from ESD and other electrical Damage to transients. The SP3014 not only provides a near-ideal brickwall clamp response, but also has a load capacitance of only 0.5pF, making it suitable for a variety of low speed and high speed applications." The SP3014 series of TVS diode arrays have the following main advantages: With a very low dynamic resistance of 0.04 Ω, the clamping voltage is more than 50% lower than a similar silicon solution, protecting the most vulnerable integrated circuits from damage or premature failure. • Strong ESD protection (±15kV contact discharge, ±25kV air discharge) allows manufacturers to offer products with ESD protection that exceeds the highest IEC standards. Capacitance as low as 0.5pF minimizes signal loss and maintains system performance, reducing designers' dependence on accurate trace impedance simulators. • The small μDFN-6L package allows routing directly under the device, simplifying PCB layout without the need for short lines that can cause signal loss. • Automotive-grade quality to ensure maximum reliability in the most demanding environments. Availability The SP3014 series of TVS diode arrays are available in 3,000-piece quantities and are available in tape and reel packaging. Samples are available from authorized Littelfuse distributors around the world. For a list of Littelfuse authorized dealers, visit Littelfuse.com. More information For more information, please see the SP3014 Series product page and specifications. If you have technical questions, please contact: Product Director Chad Marak. Power Film Capacitors - Plastic Case Polypropylene High Voltage Capacitor,axial film capacitor,axial capacitor,SHV capacitor XIAN STATE IMPORT & EXPORT CORP. , https://www.shvcomponents.com