description: Linear Technology Corporation introduces the LTC3600, a 1.5A, high efficiency, synchronous buck regulator that can be easily paralleled for high current applications and can be adjusted with a single resistor to 0V. This new switching regulator architecture uses a 50uA current reference combined with a single resistor to set the output voltage. This unique design allows for very easy current sharing between multiple regulators, allowing a single external resistor to set the output voltage of all regulators. The LTC3600 offers high performance without any discounts. The device's wide 4V to 15V input voltage range makes it ideal for dual-cell Li-Ion battery applications as well as fixed 5V and 12V intermediate bus systems, while synchronous rectification provides up to 96% efficiency. The new design of the LTC3600 allows the output voltage to be dynamically adjusted from 0V to VIN – 0.5V, providing nearly rail-to-rail performance. The device provides zero output, so you can power down individual power rails as needed. Its built-in fine-tuned reference achieves ±1% accuracy. In addition, the output regulation and transient response are unaffected by the output voltage. For applications that require power sequencing, output voltage tracking or soft-start can be easily set via the ISET pin. The LTC3600's wide VIN and VOUT capabilities, tight voltage and load regulation, high efficiency, few external components, and parallel capability make it ideal for new multi-track systems. The LTC3600's 3mm x 3mm DFN or thermally enhanced MSOP-12 package combined with a 200kHz to 4MHz switching capability allows the use of tiny, low cost capacitors and inductors, providing a very compact footprint for multi-rail applications. solution. Other features include a power good voltage monitor, external synchronization capability, and thermal protection. Diesel Gensets,Generator Electric,Generador Electrico,Generator Electric Start Wuxi Doton Power , https://www.dotonpower.com