The actual operation of the solar LED street light controller, the general solar street lamp manufacturers will set up and debug the controller before leaving the factory, realize the external access parameters on the debugging solar LED street lighting system, and implement intelligent unattended work. status. In order to fully meet the working requirements of the LED light source, the set parameters will be written into the data flash memory of the solar controller. Let the controller control the entire solar LED street lighting system from time to time. Moreover, the solar panel is also charged to the battery through the solar controller during charging to meet the nighttime operation of the lighting device. At the same time, when the battery is performing voltage collection, the controller uses the PWM function to manage the charging of the battery. Open circuit protection for the battery. If the solar panel is charging normally, the controller will turn off the load to ensure that the load is not damaged. If it is not charged at night or when the solar panel is not charging, the controller will lose its instinct and there will be no signs of any action. The solar LED street light controller can be used for battery reverse connection, over charge, and over discharge. The load output controls and detects the two load outputs. Each channel of the output has a circuit design of an independent control system to achieve perfect control requirements and perfect overcurrent short circuit protection. With such a controller, the entire solar LED street lighting system can be protected and the service life of the entire device can be extended.
What are IC Sockets?
IC (Integrated circuit) Sockets
IC Sockets connector is designed to provide a compressive interconnect between component leads and a printed circuit board (PCB). This connector is designed to provide a compressive interconnect between component leads and a printed circuit board (PCB). It simplifies the board design, enables simple reprogramming and expansion and easy repair and replacement, and offers a cost-effective solution without the risk of direct soldering. With a wide range of solutions for land grid array (LGA) and pin grid array (PGA) sockets, this connector features contact tip geometry optimized to reduce risk of contact damage during handling and package installation.
PGA – Pin Grid Array Sockets. Complex printed circuits are too valuable to risk direct soldering to expensive integrated circuits (ICs). Using a socket is the answer. The use of sockets offers advantages that prove cost effective and simplify board design.
SIMM – Single In-line Memory Module. These have a single row of pins which connect memory modules to circuit boards. They are space saving and can be installed at predetermined angles with positive polarisation to prevent memory modules from being inserted incorrectly. They are used mainly in older computers dating from the 1980s to late 1990s. Available in various sizes and number of pins.
In notebook and desktop computers, LGA sockets feature a robust bolster plate for reliable connection to the microprocessor package while limiting PCB bowing during compression.
In servers, our mPGA and PGA sockets -- with custom arrays available in more than 1,000 positions --offer zero insertion force (ZIF) interface to the microprocessor PGA package and attach to the PCB with surface-mount technology (SMT) soldering. Antenk's IC sockets are designed for higher performance CPU processors.
IC Sockets,Ic Socket Connectors,Pin IC Socket,Pin IC Socket Connector,IC Sockets Adapters,IC Sockets & Plugs,Integrated circuit Sockets,IC Sockets and Headers ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com
Most of our everyday electrical devices contain integrated circuits (ICs) or chips which are installed on the printed circuit board (PCB). Most chips are soldered directly onto the board but sometimes they need to be interchangeable, or removed, and this is when an IC socket is used.
The IC socket fits onto the board and holds the chip, protecting it from heat damage which could be caused by soldering. Programmable chips are a great example where IC sockets are used, allowing removal for testing, programming or replacement due to failure.
Antenk offer a comprehensive range of DIP, SIP and PGA sockets to suit most multiple electrical applications.
Types of IC Sockets
DIL /DIP– Dual in-line. These have two parallel rows of pins, available in various numbers to match the relevant IC and are normally very cost effective. A larger socket can be created by placing two smaller ones together, end-to-end, e.g. two 8-pins become 16-pin.
SIL/SIP – Single in-line. This socket has a single line of pins and are frequently used in smaller applications like resistor arrays or boards with short lead pins, such as a desktop computer. There are many different sizes and attributes available.
DIMM – Dual In-line Memory Module. Random Access Memory (RAM) can be easily installed in computers or laptops using DIMM sockets. These are important components that help to ensure reliable connectivity. They have two separate rows of electrical contacts or pins on either side. It`s a general rule that the more pins the higher the RAM it supports. There are various pin sizes available.
IC Sockets Connector/Integrated Circuit Sockets Typical Applications
What are the requirements for the operation of the controller for solar LED street lights?
Solar LED street light is a new energy-saving and environment-friendly lighting equipment in recent years. It uses inexhaustible solar energy in the natural world to generate electricity, and combines its advantages with LED lighting. The goal of achieving common lighting between LED and solar energy is to realize the power generation that is not restricted by the mains. It is an advanced lighting device that combines LED light source and solar energy. So what are the requirements for the operation of the controller for solar LED street lights?