Recently, Vishay Intertechnology, Inc. (NYSE stock code: VSH) announced the launch of a new AEC-Q100 (Grade 1) certified dual DPDT / four SPDT analog switch --- DGQ2788A, the switch at 2.7V resistance 0.37Ω, 338MHz bandwidth, in a small 2.6mm x 1.8mm x 0.55mm miniQFN16 package. The Vishay Siliconix DGQ2788A is ideal for analog and digital signal switching in space-constrained automotive applications with very flat resistance and parasitic capacitance curves for improved signal integrity and higher bandwidth. This article refers to the address: http:// The device released today is the first product of Vishay's automotive analog switch that is being developed to address in-vehicle intelligent communications, infotainment, advanced driver assistance systems (ADAS), advanced diagnostics and engine control modules, traction and stability control modules, and Signal switching requirements in the rapidly growing automotive segment, such as power windows, car locks and rearview mirrors. These applications require audio, video, bus, and communication interface switches to bridge and route signals. The competing device with similar resistance has a maximum operating voltage of 4.3V, and the DGQ2788A expands the voltage range to 5.5V, which can adapt to the commonly used 5V industrial signal. The switch's resistance flatness is 10mΩ, which results in a THD of -100dB, an increase of 20dB, while other devices have a flatness of up to 500mΩ. In addition, the parasitic capacitance CON of the DGQ2788A is 26pF, and the COFF is 14.5pF, which is 70% lower, which increases the -3dB bandwidth at 338MHz by a factor of three. To achieve optimal bandwidth, competitive devices can only use 2.3V to 3.6V power supply. The DGQ2788A features a gated switch design that achieves a low 88% switching RC matrix. The device has the advantages of wide operating voltage range, low resistance and high bandwidth, which fully meets various design requirements and simplifies the BOM. The DGQ2788A operates from -40°C to +125°C and features four independent selectable SPDT switches and two control inputs. All switches are well-conducted in both directions and can be used as a multiplexer or demultiplexer. The switch is powered from a 1.8V to 5.5V supply and has a logic threshold of 1.2V for digital inputs, which is guaranteed to be compatible with low voltage TTL/CMOS. The device is RoHS compliant, with a switch-on and turn-off mode, with power-down protection, ESD protection greater than 2kV (human body model), and latch-up current up to 300mA required by the per JESD78 standard. There are some draft products here, which will not be displayed on the website. These products can be modified later to enrich the content of the website. If you want to know more about our company, you can go to our website to check, there will be what you want, or you can consult us. Nice to meet you and looking forward to our cooperation. Draft-waiting For Releasing,Draft-waiting For Releasing,Draft-waiting For Releasing ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com