Peek Braided Sleeve,Cable Sleeve,Heat Resistant Braided Sleeving,Braided Wire Wrap Shenzhen Huiyunhai Tech.Co., Ltd. , https://www.cablesleevefactory.com
1. In order to obtain the best image quality, users usually connect the HDMI cable to the HDMI port of the computer and the TV. After connecting the TV and computer equipment, press the TV/Source button on the remote control to display the main source menu of the signal source. Press the left and right arrow keys to select the [HDMI1] source and press the enter key to confirm. 
If the home does not have the wiring conditions, then we can also connect the computer and television in the same WIFI environment. The user can then use the application software to make the computer and television file transfer or screencast. Specific steps are as follows:
1. Download the XBMC TV version application software.
Third-party software download and installation tutorial>>
2. Set the XBMC Chinese display.
The first step: use the remote control up, down, left, and right keys to control, and the operation enters "Settings" of "SYSTEM". 
Haier TV connection computer commonly used methods introduced
For novice users, except for the installation of smart TVs after purchasing smart TVs, it is most difficult to connect TVs to computers. So for Haier smart TV, how can we use the simplest way to connect the TV to the computer? The following Xiao Bian will tell you about the common ways of veterans. First, need to use hardware support methods 2. If the computer does not support HDMI, connect the computer's video cable (D-SUB) to the computer's input video port on the TV, and the audio output port to the component's input audio port on the TV. After connecting the TV and computer equipment, press the TV/Source or Source button on the remote control to display the main menu of the source, press the left or right button to select [Computer] or PC source, and then press the Enter key to confirm. Second, need the same WIFI network environment Step 2: On the popup page, select "Appearance" and click OK. Step 3: Select "Skin" Use the "Right" arrow keys to select the "Arial based" font in "Font". At this time, select the arrow that needs to move the cursor to the right. Step 4: After the setting is successful, the cursor will move to the left. After moving to “Internationalâ€, select the “Language†point by pressing the arrow key to the right and select “Chinese (Simple)†to confirm.