Customized high-precision signal conditioning template SC-1000 series

The signal conditioner is the interface between the sensor and the data acquisition system. It can carry out signal reception, signal physical quantity conversion, signal amplification, signal linearization, signal cold junction compensation, signal zero correction, signal filtering, signal calibration, and bridge configuration for various physical quantity analog signals output from various measured sensors. Conditioning. As well as providing the required excitation for various sensors (various types of AC voltage excitation, DC voltage excitation, AC current excitation, or DC current excitation), making it a data acquisition system (eg, PXI data acquisition system, VXI data acquisition "Clean" measurable voltages within the trimmed level range that can be accepted by the system and PC data acquisition card, etc. or other measuring instruments for data acquisition and processing.
Features
The SC-1000 signal conditioner system adopts a modular design. Each signal conditioning template is a functional module, making the system relatively independent and capable of achieving standardization and modularization. This can be flexibly configured according to the requirements and the different tests. The system adopts the international standard 3U standard template structure, which has a simple structure, complete types of signal conditioning function templates, and is easy to use and easy to expand. Users can configure large, medium and small signal conditioner systems according to different application requirements. The SC-1000 signal conditioner system with high performance, high reliability, high stability, and high anti-interference capability is at the international advanced level in terms of technology and function. It can be seen that the SC-1000 signal conditioner system has a wide range of applications.
According to customer requirements to develop a variety of signal conditioning template or module
SC-1000 series analog input signal conditioning function template
model Measurement signal type
Note
SC-1010 strain,
Voltage amount Symmetrical high-precision voltage excitation.
With bridge half bridge or quarter bridge bridge function selection; support 350Î© or 120Î© strain bridge with bridge.
With bridge calibration function.
Two-speed, fourth-order, low-pass active filtering with selectable cutoff frequency.
SC-1020 Displacement,
Current amount,
Voltage amount Provides shift sensor excitation voltage.
Conveniently convert between voltage, current, or displacement measurements.
Measuring current signal range: 0 ~ 20mA or 4 ~ 20mA.
Two-speed, fourth-order, low-pass active filtering with selectable cutoff frequency.
SC-1030 ICP vibration Current excitation, 4 ~ 20mA.
SC-1040 RTD type temperature Current excitation, 1mA, 500Î¼A, 200Î¼A, 100Î¼A.
Supports Pt100, Pt500, Pt1000, Pt2000 temperature sensors.
When the temperature is zero, the output is zero voltage. In the positive temperature signal, the output is a positive voltage value, and in the negative temperature signal, the output is a negative voltage value.
The measurement accuracy is independent of the length of the connection cable between the temperature sensor and the SC-1040 module; it is not related to the change in the resistance value of the connection cable due to changes in the ambient temperature.
Sixth-order Butterworth-type low-pass active filter.
SC-1050 Thermocouple type temperature Can measure a variety of standard indexing thermocouples and a variety of non-standard thermocouples.
With thermocouple sensor open circuit test function.
External cold junction compensation is used.
Sixth-order Butterworth-type low-pass active filter.
SC-1051 Thermocouple type temperature The three sides of the circuit are fully isolated. Isolation voltage 1kVrms.
Thermocouples with various standard indexing numbers and various non-standard thermocouples are supported.
With thermocouple sensor open circuit test function.
External cold junction compensation is used.
Sixth-order Butterworth-type low-pass active filter.
For details, please contact 010-62341751.

The non dimmable Series of Constant Voltage Led Drivers from ZHPOWER offer UL 8750 Listed style enclosures. The UL Listed type dc led drivers is Class 2 rated and are suitable for indoor installations. With universal input voltage ranging from 100VAC to 277VAC and output voltage options of 12V and 24V, the series drivers also includes Auto Reset, over current and short circuit protection.
24VDC Triac/Phase-Cut Dimmable Led Driver
Led Power Driver,Constant Voltage Led Driver,Led Power Supply,Non Dimmable Driver
Shenzhenshi Zhenhuan Electronic Co Ltd , https://www.szzhpower.com

model	Measurement signal type	Note
SC-1010	strain, Voltage amount	Symmetrical high-precision voltage excitation. With bridge half bridge or quarter bridge bridge function selection; support 350Î© or 120Î© strain bridge with bridge. With bridge calibration function. Two-speed, fourth-order, low-pass active filtering with selectable cutoff frequency.
SC-1020	Displacement, Current amount, Voltage amount	Provides shift sensor excitation voltage. Conveniently convert between voltage, current, or displacement measurements. Measuring current signal range: 0 ~ 20mA or 4 ~ 20mA. Two-speed, fourth-order, low-pass active filtering with selectable cutoff frequency.
SC-1030	ICP vibration	Current excitation, 4 ~ 20mA.
SC-1040	RTD type temperature	Current excitation, 1mA, 500Î¼A, 200Î¼A, 100Î¼A. Supports Pt100, Pt500, Pt1000, Pt2000 temperature sensors. When the temperature is zero, the output is zero voltage. In the positive temperature signal, the output is a positive voltage value, and in the negative temperature signal, the output is a negative voltage value. The measurement accuracy is independent of the length of the connection cable between the temperature sensor and the SC-1040 module; it is not related to the change in the resistance value of the connection cable due to changes in the ambient temperature. Sixth-order Butterworth-type low-pass active filter.
SC-1050	Thermocouple type temperature	Can measure a variety of standard indexing thermocouples and a variety of non-standard thermocouples. With thermocouple sensor open circuit test function. External cold junction compensation is used. Sixth-order Butterworth-type low-pass active filter.
SC-1051	Thermocouple type temperature	The three sides of the circuit are fully isolated. Isolation voltage 1kVrms. Thermocouples with various standard indexing numbers and various non-standard thermocouples are supported. With thermocouple sensor open circuit test function. External cold junction compensation is used. Sixth-order Butterworth-type low-pass active filter.