January 09, 2025

150m HDMI Extender TCP/IP (by single cat5e/6)

Posted on

Sound Channel: 5.1
FM: Without FM
HDMI Quantity: 1
OEM: Avaliable
Trademark: Mealink
Origin: Shenzhen, China
Sound Channel: 5.1
FM: Without FM
HDMI Quantity: 1
OEM: Avaliable
Trademark: Mealink
Origin: Shenzhen, China
1.Introduction
HDMI Over Ethernet is based on TCP/IP standard. It transmit your HD display with the high resolutions up to 395 feet (150 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard,you can extend your HD video to multiple displays by using an Ethernet Switch.

2 .Specifications
1. Following TCP/IP standard.
2. Support HDMI1.3 protocol.
3.HDCP1.1 & 1.2 protocol compliant
4.Support point-to-point mode, one point-to-many mode and cascade connection mode.
5. Support IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.


HDTV Resolutions 480p,576p,720p,1080p
Audio Sample rate:32kHz, 44.1kHz and 48kHz
IR remote control 38KHz; NEC
HDMI HDMI 1.3
HDCP HDMI 1.2
Power adapter Input: 100V - 240V (50 - 60Hz)   Output: 5V/1A
Power consumption HDMI Sender: 3W   HDMI Receiver: 3W
Size(L-W-H) 110×75×25mm
Weight 128g*2PCS
Operating Temperature/Humidity 0ºC  - 70ºC  / 10% - 80%RH(no condensation)
Storage Temperature/Humidity -10ºC  - 80ºC/ 5% -90% RH(no condensation)

3.PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
1)  Main unit No. 1 Sender , Main unit No. 2 Receiver
2)  Two pieces of 5V DC Power Supply.
3)  a pieces of IR transmitter and a pieces of IR receiver
4)  User's Manual

4. Panel Descriptions

HDMI Sender
              
5V/1A Supply power for the Sender
RESET Hold down the key for 10 seconds, the model will Restore the default setting
IR-OUT Connect IR transmitter to this Port.
HDMI - IN Connect HDMI Source to this Port.
STATUS When system start up, the Green LED will be on,When transmit video, the led will blink.
Power Power on, The Red led is on

HDMI Receiver

5V/1A Supply power for the Receiver
RESET Hold down the key for 10 seconds, the model will Restore the default setting
IR-IN Connect IR receiver to this Port.
HDMI - Out Connect HDMI sink device to this Port.
STATUS When system start up, the Green LED will be on,When transmit video, the led will blink.
Power Power on, The Red led is on


5.Connection and operation
1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of Sender.
2) Connect the IR sender to the Sender IR OUT Port, and Be Directed at HDMI video source's IR receiver.
3) Connect the HDMI out of Receiver to HDTV display.
4) Connect the IR receiver to the Receiver IR IN Port.
5) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.
6) Plug two pieces of 5V power supply into the Sender and Receiver.
7) Power on the HDTV display and HDMI source. 

1.Introduction
HDMI Over Ethernet is based on TCP/IP standard. It transmit your HD display with the high resolutions up to 395 feet (150 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard,you can extend your HD video to multiple displays by using an Ethernet Switch.

2 .Specifications
1. Following TCP/IP standard.
2. Support HDMI1.3 protocol.
3.HDCP1.1 & 1.2 protocol compliant
4.Support point-to-point mode, one point-to-many mode and cascade connection mode.
5. Support IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.


HDTV Resolutions 480p,576p,720p,1080p
Audio Sample rate:32kHz, 44.1kHz and 48kHz
IR remote control 38KHz; NEC
HDMI HDMI 1.3
HDCP HDMI 1.2
Power adapter Input: 100V - 240V (50 - 60Hz)   Output: 5V/1A
Power consumption HDMI Sender: 3W   HDMI Receiver: 3W
Size(L-W-H) 110×75×25mm
Weight 128g*2PCS
Operating Temperature/Humidity 0ºC  - 70ºC  / 10% - 80%RH(no condensation)
Storage Temperature/Humidity -10ºC  - 80ºC/ 5% -90% RH(no condensation)

3.PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
1)  Main unit No. 1 Sender , Main unit No. 2 Receiver
2)  Two pieces of 5V DC Power Supply.
3)  a pieces of IR transmitter and a pieces of IR receiver
4)  User's Manual

4. Panel Descriptions

HDMI Sender
              
5V/1A Supply power for the Sender
RESET Hold down the key for 10 seconds, the model will Restore the default setting
IR-OUT Connect IR transmitter to this Port.
HDMI - IN Connect HDMI Source to this Port.
STATUS When system start up, the Green LED will be on,When transmit video, the led will blink.
Power Power on, The Red led is on

HDMI Receiver

5V/1A Supply power for the Receiver
RESET Hold down the key for 10 seconds, the model will Restore the default setting
IR-IN Connect IR receiver to this Port.
HDMI - Out Connect HDMI sink device to this Port.
STATUS When system start up, the Green LED will be on,When transmit video, the led will blink.
Power Power on, The Red led is on


5.Connection and operation
1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of Sender.
2) Connect the IR sender to the Sender IR OUT Port, and Be Directed at HDMI video source's IR receiver.
3) Connect the HDMI out of Receiver to HDTV display.
4) Connect the IR receiver to the Receiver IR IN Port.
5) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.
6) Plug two pieces of 5V power supply into the Sender and Receiver.
7) Power on the HDTV display and HDMI source. 

A weak electrical cable is a cable used for security communications, electrical equipment, and related weak electrical transmissions.

Wire and cable refers to materials used in power, communications, and related transmission applications. There are no strict boundaries between "wires" and "cables." Generally, a product with a small number of cores, a small product diameter, and a simple structure is called a wire, a non-insulated wire is called a bare wire, and the other is called a cable; a conductor having a large cross-sectional area (greater than 6 square millimeters) is called a large wire. Small (less than or equal to 6 square millimeters) is called a small wire, and insulated wire is also called a wire.


Wire and cable mainly includes bare wires, electromagnetic wires and insulated wires for electrical appliances, power cables, communication cables and optical cables.

composition

It consists of an inner conductor, an insulation, an outer conductor and a sheath from the inside out;

Inner conductor: Since the attenuation is mainly caused by the resistance of the inner conductor, the inner conductor has a great influence on the signal transmission.

Insulation: affects attenuation, resistance, return loss and other properties

Outer conductor: return conductor, shielding

Civil Building Cable

Civil Building Cable,Suspension Cable,Pvc Insulated Wire,Control Power Cable

Jiangsu QiSheng Cable Co., Ltd. , http://www.shuaihe-cable.com