Breze stiik mega changed the game of the Disposable Vape industry, it features with the function of bottom airflow adjustable, which will make it possible that vaper can enjoy the different vaping experience, especially the airflow.
This Breze Stiik Mega encapsulated with a 1100mAh battery, it carries a 5% nicotine salt strength, and it produces approximately 2200 puffs per piece, holding a 7.0ml capacity high-grade pure taste nicotine salt juice.
This is a breze stiik mega, a perfect alternative of smoking a real cigarette. And it`s portable, convenient to use, because it`s not only light but also constructed in a way to make it pocket – friendly for your day-to-day travels. What`s more, the most amazing part of it is the variety of fantastic flavors choices. As a result, this pod produces pure strong, and intoxicating vapor and flavors that you will fall in love with it once you have your first puff.
Specs & Features:
Custom Disposable Vape Pen,Breze Stiik vape,Breze Stiik disposable Hongkong Onice Limited , https://www.ousibangvape.com
Any transmission cable can be equivalent to a distributed system consisting of resistors, capacitors and inductors. Due to the presence of capacitance and inductance, the transmission cable has its own special frequency characteristics, ie different delays for signals of different frequencies (also That is, the so-called different transmission rates) and the presentation of different impedances, obviously, this will cause a certain distortion of the signal. In addition, the resistance of the cable will also cause loss of signal, but since the acoustic signal connection line is usually short, this loss is negligible. However, the speaker cable can not be ignored, because the connection line between the amplifier and the speaker is long and the power transmitted is large, and the resistance of the cable has a direct influence on the output stage of the power amplifier (the load impedance becomes large). Another important parameter of the transmission line is the characteristic impedance. Although the impedance matching in the audio electronic circuit is not as high as that of the high-frequency circuit or the large-signal circuit, if the difference is too large, the sound of the playback will be affected. .
The audio amplifiers have roughly the following sound sources: radio heads, tape playback heads, CD players, record players, etc. The output impedances of these audio sources are different, so the characteristic impedance of the wires should be similar to the output impedance of the audio source device when mated.
We can divide the signal lines into strong signal lines, weak signal lines and standard signal lines for discussion:
1. The strong signal line refers to the connection line between the speaker and the power amplifier. This type of line often has no shielding layer. For this kind of wire, the key is to reduce its resistance, because the output resistance of modern power amplifier is very low, so the speaker line is The requirements are also increased, such as the choice of large cross-sectional area or stranded wire. The wire is from pure copper to silver wire. The speaker cable of the more expensive price is the special line of oxygen-free copper speaker. Its main feature is good electrical conductivity and low resistivity. It uses it to increase the sound when playing back the sound. less. Since the transmission line has different impedances to different frequency signals, this characteristic appears to be unclear in the sound reproduction. For this reason, a high-end speaker connection line called an intelligent signal line has been produced, and the characteristics of this line are The signal is divided into two channels according to the frequency. The outer layer of a certain thickness passes the signal above 5KHz, and the signal below 5KHZ is transmitted through the inner layer of the line, which greatly improves the frequency characteristics of the transmission line and enables playback. The sound is clear and transparent. However, if your amplifier's output power is small or the speaker cable is short, don't spend money on this expensive wire. In this case, the effect is not outstanding.
2. The weak signal line refers to the connection between the microphone and the preamplifier, usually a shielded line.
3. The standard level signal line refers to the connection line between the sound source and the power amplifier. Its transmission level is about 1V, which is also a shield type transmission line. This type of wire is the most widely used in the audio industry. Interestingly, wires made of different insulating media and metal materials have a subtle effect on sound quality. For this reason, manufacturers have produced a variety of wire types to meet people's needs. Different levels of music appreciation requirements. The high-grade finished wire is made of nylon braided sleeve coated with anti-static layer, lined with metal shielding sleeve and then made of oxygen-free pure copper as core wire, and then with gold-plated plug to prevent the plug from contacting badly and generating noise. The standard level signal wire brands are: MONSTER STANDRDINTERLINK (USA), AUDIO0UEST (Santa), SUPRA (Squid), M0NITERPC (Magic), SPACE & TIME (Time Out), MISSION (American Sound), PATRDNICS (Bai Li) and many more. Japan's MAKURAWA, DENK0, PATRD NICS, etc. Japan's MAKURAWA, DENK0, 0SONIC, PC 0 CC (Furukawa), ACROTEC (Japan Mining), HISAGO (with sand fruit), Lux, gold scorpion, etc., and Europe PHILIPS (Netherlands-Philips), VDH (Netherlands-Wandenhal), IXOS (UK-Aisuosi), 0RT0F0N (Denmark-Highly Wind), etc. These lines are all made by using different materials and processes. In order to achieve the purpose of changing the frequency characteristics and improving the sound quality of playback, at best, it only plays a role in improving the expressiveness of music.
If you are not a music fan or your amp is too low, don't spend any money to buy these expensive audio cables, because if your amp is not enough for music performance, use ordinary wires and expensive. The price wire effect is the same. According to one of my audiophile told me that the effect of the sound quality of your amp if the price is not more than 20,000 yuan, the choice of expensive wire simply not show improvement.
In summary, a set of audio systems, the selection of standard level signal wires only plays a supporting role in the impact of sound quality, expensive audio wire can only be loved by expensive amplifiers. It is most practical to choose the right speaker cable according to the output power. In the audio industry, in addition to paying attention to power amplifiers, speakers, audio sources and other equipment, the signal connection wire is also very particular about, the price of each line is in the sky price of 100 yuan to 1,000 yuan or even 10,000 yuan, some people say it. It is considered to be a great waste to invest money and energy on the wire in order to improve the sound quality. The improvement of the sound quality of the wire is very small, and it is seriously unbalanced compared with its price. So how much influence does the signal line have on sound quality? I am not an audiophile, so there is no fascination with the fans, but I also neglect the uselessness of the wire. I will discuss my view of the audio wire with a pragmatic attitude.
Any transmission cable can be equivalent to a distributed system consisting of resistors, capacitors and inductors. Due to the presence of capacitance and inductance, the transmission cable has its own special frequency characteristics, ie different delays for signals of different frequencies (also That is, the so-called different transmission rates) and the presentation of different impedances, obviously, this will cause a certain distortion of the signal. In addition, the resistance of the cable will also cause loss of signal, but since the acoustic signal connection line is usually short, this loss is negligible. However, the speaker cable can not be ignored, because the connection line between the amplifier and the speaker is long and the power transmitted is large, and the resistance of the cable has a direct influence on the output stage of the power amplifier (the load impedance becomes large). Another important parameter of the transmission line is the characteristic impedance. Although the impedance matching in the audio electronic circuit is not as high as that of the high-frequency circuit or the large-signal circuit, if the difference is too large, the sound of the playback will be affected. .
The audio amplifiers have roughly the following sound sources: radio heads, tape playback heads, CD players, record players, etc. The output impedances of these audio sources are different, so the characteristic impedance of the wires should be similar to the output impedance of the audio source device when mated.
We can divide the signal lines into strong signal lines, weak signal lines and standard signal lines for discussion:
1. The strong signal line refers to the connection line between the speaker and the power amplifier. This type of line often has no shielding layer. For this kind of wire, the key is to reduce its resistance, because the output resistance of modern power amplifier is very low, so the speaker line is The requirements are also increased, such as the choice of large cross-sectional area or stranded wire. The wire is from pure copper to silver wire. The speaker cable of the more expensive price is the special line of oxygen-free copper speaker. Its main feature is good electrical conductivity and low resistivity. It uses it to increase the sound when playing back the sound. less. Since the transmission line has different impedances to different frequency signals, this characteristic appears to be unclear in the sound reproduction. For this reason, a high-end speaker connection line called an intelligent signal line has been produced, and the characteristics of this line are The signal is divided into two channels according to the frequency. The outer layer of a certain thickness passes the signal above 5KHz, and the signal below 5KHZ is transmitted through the inner layer of the line, which greatly improves the frequency characteristics of the transmission line and enables playback. The sound is clear and transparent. However, if your amplifier's output power is small or the speaker cable is short, don't spend money on this expensive wire. In this case, the effect is not outstanding.
2. The weak signal line refers to the connection between the microphone and the preamplifier, usually a shielded line.
3. The standard level signal line refers to the connection line between the sound source and the power amplifier. Its transmission level is about 1V, which is also a shield type transmission line. This type of wire is the most widely used in the audio industry. Interestingly, wires made of different insulating media and metal materials have a subtle effect on sound quality. For this reason, manufacturers have produced a variety of wire types to meet people's needs. Different levels of music appreciation requirements. The high-grade finished wire is made of nylon braided sleeve coated with anti-static layer, lined with metal shielding sleeve and then made of oxygen-free pure copper as core wire, and then with gold-plated plug to prevent the plug from contacting badly and generating noise. The standard level signal wire brands are: MONSTER STANDRDINTERLINK (USA), AUDIO0UEST (Santa), SUPRA (Squid), M0NITERPC (Magic), SPACE & TIME (Time Out), MISSION (American Sound), PATRDNICS (Bai Li) and many more. Japan's MAKURAWA, DENK0, PATRD NICS, etc. Japan's MAKURAWA, DENK0, 0SONIC, PC 0 CC (Furukawa), ACROTEC (Japan Mining), HISAGO (with sand fruit), Lux, gold scorpion, etc., and Europe PHILIPS (Netherlands-Philips), VDH (Netherlands-Wandenhal), IXOS (UK-Aisuosi), 0RT0F0N (Denmark-Highly Wind), etc. These lines are all made by using different materials and processes. In order to achieve the purpose of changing the frequency characteristics and improving the sound quality of playback, at best, it only plays a role in improving the expressiveness of music.
If you are not a music fan or your amp is too low, don't spend any money to buy these expensive audio cables, because if your amp is not enough for music performance, use ordinary wires and expensive. The price wire effect is the same. According to one of my audiophile told me that the effect of the sound quality of your amp if the price is not more than 20,000 yuan, the choice of expensive wire simply not show improvement.
In summary, a set of audio systems, the selection of standard level signal wires only plays a supporting role in the impact of sound quality, expensive audio wire can only be loved by expensive amplifiers. It is most practical to choose the right speaker cable according to the output power. In the audio industry, in addition to paying attention to power amplifiers, speakers, audio sources and other equipment, the signal connection wire is also very particular about, the price of each line is in the sky price of 100 yuan to 1,000 yuan or even 10,000 yuan, some people say it. It is considered to be a great waste to invest money and energy on the wire in order to improve the sound quality. The improvement of the sound quality of the wire is very small, and it is seriously unbalanced compared with its price. So how much influence does the signal line have on sound quality? I am not an audiophile, so there is no fascination with the fans, but I also neglect the uselessness of the wire. I will discuss my view of the audio wire with a pragmatic attitude.
Any transmission cable can be equivalent to a distributed system consisting of resistors, capacitors and inductors. Due to the presence of capacitance and inductance, the transmission cable has its own special frequency characteristics, ie different delays for signals of different frequencies (also That is, the so-called different transmission rates) and the presentation of different impedances, obviously, this will cause a certain distortion of the signal. In addition, the resistance of the cable will also cause loss of signal, but since the acoustic signal connection line is usually short, this loss is negligible. However, the speaker cable can not be ignored, because the connection line between the amplifier and the speaker is long and the power transmitted is large, and the resistance of the cable has a direct influence on the output stage of the power amplifier (the load impedance becomes large). Another important parameter of the transmission line is the characteristic impedance. Although the impedance matching in the audio electronic circuit is not as high as that of the high-frequency circuit or the large-signal circuit, if the difference is too large, the sound of the playback will be affected. .
The audio amplifiers have roughly the following sound sources: radio heads, tape playback heads, CD players, record players, etc. The output impedances of these audio sources are different, so the characteristic impedance of the wires should be similar to the output impedance of the audio source device when mated.
We can divide the signal lines into strong signal lines, weak signal lines and standard signal lines for discussion:
1. The strong signal line refers to the connection line between the speaker and the power amplifier. This type of line often has no shielding layer. For this kind of wire, the key is to reduce its resistance, because the output resistance of modern power amplifier is very low, so the speaker line is The requirements are also increased, such as the choice of large cross-sectional area or stranded wire. The wire is from pure copper to silver wire. The speaker cable of the more expensive price is the special line of oxygen-free copper speaker. Its main feature is good electrical conductivity and low resistivity. It uses it to increase the sound when playing back the sound. less. Since the transmission line has different impedances to different frequency signals, this characteristic appears to be unclear in the sound reproduction. For this reason, a high-end speaker connection line called an intelligent signal line has been produced, and the characteristics of this line are The signal is divided into two channels according to the frequency. The outer layer of a certain thickness passes the signal above 5KHz, and the signal below 5KHZ is transmitted through the inner layer of the line, which greatly improves the frequency characteristics of the transmission line and enables playback. The sound is clear and transparent. However, if your amplifier's output power is small or the speaker cable is short, don't spend money on this expensive wire. In this case, the effect is not outstanding.
2. The weak signal line refers to the connection between the microphone and the preamplifier, usually a shielded line.
3. The standard level signal line refers to the connection line between the sound source and the power amplifier. Its transmission level is about 1V, which is also a shield type transmission line. This type of wire is the most widely used in the audio industry. Interestingly, wires made of different insulating media and metal materials have a subtle effect on sound quality. For this reason, manufacturers have produced a variety of wire types to meet people's needs. Different levels of music appreciation requirements. The high-grade finished wire is made of nylon braided sleeve coated with anti-static layer, lined with metal shielding sleeve and then made of oxygen-free pure copper as core wire, and then with gold-plated plug to prevent the plug from contacting badly and generating noise. The standard level signal wire brands are: MONSTER STANDRDINTERLINK (USA), AUDIO0UEST (Santa), SUPRA (Squid), M0NITERPC (Magic), SPACE & TIME (Time Out), MISSION (American Sound), PATRDNICS (Bai Li) and many more. Japan's MAKURAWA, DENK0, PATRD NICS, etc. Japan's MAKURAWA, DENK0, 0SONIC, PC 0 CC (Furukawa), ACROTEC (Japan Mining), HISAGO (with sand fruit), Lux, gold scorpion, etc., and Europe PHILIPS (Netherlands-Philips), VDH (Netherlands-Wandenhal), IXOS (UK-Aisuosi), 0RT0F0N (Denmark-Highly Wind), etc. These lines are all made by using different materials and processes. In order to achieve the purpose of changing the frequency characteristics and improving the sound quality of playback, at best, it only plays a role in improving the expressiveness of music.
If you are not a music fan or your amp is too low, don't spend any money to buy these expensive audio cables, because if your amp is not enough for music performance, use ordinary wires and expensive. The price wire effect is the same. According to one of my audiophile told me that the effect of the sound quality of your amp if the price is not more than 20,000 yuan, the choice of expensive wire simply not show improvement.
In summary, a set of audio systems, the selection of standard level signal wires only plays a supporting role in the impact of sound quality, expensive audio wire can only be loved by expensive amplifiers. It is most practical to choose the right speaker cable according to the output power.
It got a bigger and wider body and bigger battery capacity, and also more liquid capacity than most of the vapes in the market, it`s one of the most popular disposable vapes in our white label line.
Refilled Flavor: All Flavors Available
Nicotine Salt Strength: 5% / 50mg
Disposable, non-rechargeable & non-refillable
All-in-one system
Draw activated firing mechanism
Juice Capacity:7.0ml
Battery Capacity: 1100mAh
Approx 2200 puffs per device
Approximately equivalent to 150 real cigarettes per vape
Color: Same as pictures
Reference Resistance: 1.6 ohm
Product Name: Breze Stiik Mega Disposable Vape
Talking about the sound signal connecting wire
In the audio industry, in addition to paying attention to power amplifiers, speakers, audio sources and other equipment, the signal connection wire is also very particular about, the price of each line is in the sky price of 100 yuan to 1,000 yuan or even 10,000 yuan, some people say it. It is considered to be a great waste to invest money and energy on the wire in order to improve the sound quality. The improvement of the sound quality of the wire is very small, and it is seriously unbalanced compared with its price. So how much influence does the signal line have on sound quality? I am not an audiophile, so there is no fascination with the fans, but I also neglect the uselessness of the wire. I will discuss my view of the audio wire with a pragmatic attitude.