Main circuit principle of each motor of planer

Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM

Single chip microcomputer STM32L151CCU6

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin

As shown in the figure, the main circuit of each motor of the planer. The electric motor is a device that converts electric energy into mechanical energy. It is made by the phenomenon that the energized coil is rotated in the magnetic field, and is distributed to each user. The electric motor is divided into a direct current motor and an alternating current motor according to the use of the power source, and the electric motor in the electric system. Most of them are AC motors, which can be synchronous motors or asynchronous motors (the motor stator magnetic field speed and the rotor rotation speed are not kept at the same speed). The motor is mainly composed of a stator and a rotor. The direction in which the energized conductor is forced to move in the magnetic field is related to the direction of the current and the direction of the magnetic induction line (the direction of the magnetic field). The working principle of the motor is that the magnetic field acts on the current to force the motor to rotate.