1 PCB Screw Terminal Block 2 Plug-in Terminal Block 3 PCB Spring Terminal Block 4 Barrier Terminal Block 5 Feed Through Terminal Block.
Terminal block consists of fixed terminal block (hereinafter referred to as socket) and free terminal block (hereinafter referred to as plug). The socket is fixed on the electric parts through its square (round) plate (welding method is also adopted for some), the plug is generally connected with the cable, and the plug and socket are connected by connecting nuts. Terminal Block Series ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com
Major Technical Parameters
Rated voltag : AC69OV
Rated current: 80k 125k 160k 250k 400A,, 630A
Rated insulation voltage : 1000V Power frequency withstand voltage : 3500V
Vertical busbar pole distance : 55mm
Vertical busbar diameter : 6mm
Product Features
• The connector is of double chucks structure, ensuring reliable plugging. The stator of double-chuck, made of stainless steel, can effectively reduce the temperature rising incurred by turbulence.
• Each male tab is isolated by salient point to prevent direct overlapping, which increases the surface area between each male tab and ensures ideal heat dissipation.
• Plug and socket shell is provided with vent hole to facilitate heat dissipation and effective reduction of temperature rise.
• Four-pole connector is composed of three phase+Netual
• Single-pole plug and socket are available for free combination to form various Outlet modes.
Diagr
Â
Low Voltage Switchgear Main Circuit Primary Fixed Plug 80/125/160/250/400/630A
Major Technical Parameters
Rated voltag : AC69OV
Rated current: 80k 125k 160k 250k 400A,, 630A
Rated insulation voltage : 1000V Power frequency withstand voltage : 3500V
Vertical busbar pole distance : 55mm
Vertical busbar diameter : 6mm
Product Features
• The connector is of double chucks structure, ensuring reliable plugging. The stator of double-chuck, made of stainless steel, can effectively reduce the temperature rising incurred by turbulence.
• Each male tab is isolated by salient point to prevent direct overlapping, which increases the surface area between each male tab and ensures ideal heat dissipation.
• Plug and socket shell is provided with vent hole to facilitate heat dissipation and effective reduction of temperature rise.
• Four-pole connector is composed of three phase+Netual
• Single-pole plug and socket are available for free combination to form various Outlet modes.
Diagr
Â
The terminal block consists of three basic units: shell, insulator and contact body.
Strictly speaking, terminal block refers to a solid device composed of an insulating base and more than one live part. Each conductive member can be used as a joint point for connecting two or more conductors (wires), and also as a tool for connecting or not connecting conductors (wires) individually. In the literal sense, the terminal block can be thought of as a wiring platform providing terminal or wire connection. The terminal block can be a combination type or a single-piece design. The combined terminal block is stacked in the way similar to the block combination, and the two ends are added with side covers and locked and fixed with screws. As for the single terminal block, the combination process mentioned above is not necessary, and it can be used alone.
Low Voltage Switchgear Main Circuit Primary Fixed Plug 80/125/160/250/400/630A
Model NO.: MGC
Brand: Murge
Trademark: MURGE
Origin: China
Model NO.: MGC
Brand: Murge
Trademark: MURGE
Origin: China
Low Voltage Switchgear Main Circuit Primary Fixed Plug 80/125/160/250/400/630A