Door Lock Motor Characteristics 1. No direction: don't need to distinguish the door direction, left and right sides, both inside and outside the door, can be universal. (convenient purchase locks and reduce inventory).
2. Power: the power consumption is only equivalent to one 5 of the electric control lock, electric lock, 3 A magnetic lock power to open the door, often consumes 0.27 A. And spiritual lock unlock instantaneous current is less than 0.5 A, reduced the entrance guard, talkback host power consumption.
3. No collision: close the door without collision, reduces the choice of door closers requirements (not necessarily with 65 kg of door closers, door closers are free to choose to suit the door), to solve the building door because the door closers clash of the hydrodynamic force is too high, it is not easy to make the door more deformation, prolong the service life of the body.
4. The voice is light: close the door automatically locked, no noise, solves the noise due to electric control lock itself.
5. Life is long, life is up to 350000 times
Operating temperature range:
Mini Door Lock Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
lock motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Door Lock Motor,Mini Door Lock Motor,Door Lock Dc Motor,Door Lock Gear Motor Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
As the mainland market is the headquarters of MediaTek, and it is equally optimistic about the demand for low-end smartphones to replace 2G feature phones, following the launch of the first smart phone chip "MT6573" last year, this year it will also play the "MT6575" series. Qualcomm and MediaTek will this year Compete in the low-end smartphone field. MediaTek has never commented on product prices.
Looking at the rapid development of low-priced smart phones on the mainland, Morgan Stanley released a report on the 16th, which raised MediaTek’s investment rating from “neutral†to “plus,†and revised the target price from 245 yuan to 322 yuan. MediaTek shares opened lower yesterday, rising 2.5 yuan late, to 282 yuan to close, relatively strong performance in the broader market.
Vice President of Global Business Development of Qualcomm Greater China, Shen Jin, expressed at the beginning of the year that he was very optimistic about the demand of the smart phone market in mainland China, and also expressed that Qualcomm will attack the Chinese market and will cover all markets in the low, medium and high-end markets. Shen Jin said that over 60 million smart phones were sold in mainland China last year, which will surpass the US and Europe in the middle of this year and become the world’s largest smartphone market. The total sales volume at the end of the year will reach 160 million, and China will account for the importance of Qualcomm. Business weight.
In order to actively position cards, Qualcomm has continuously launched aggressive pricing strategies since the second half of last year, especially the A series of products such as the MSM7225A and 7227A, which are mainly used in the low-end market, to seize the market for the “MT6575†series of price reductions against MediaTek.
As MediaTek’s first dual-core product “MT6577†(formerly “MT6575Tâ€) will be mass-produced in the second quarter of this year, Qualcomm will cut prices again this week for the A-series products, becoming the first wave of price reduction in the second quarter. .
The smart phone chip supply chain said that after experiencing wave-by-wave price adjustments, the prices of chips for Qualcomm and MediaTek have gradually narrowed. Mediacom’s price advantage has plummeted and Qualcomm has threatened MediaTek.
However, there are quite a few companies in mainland China that use MediaTek's solutions. In the mobile phone chip supply chain, MediaTek smartphone chip shipments are expected to grow to 7 million units in April, up from more than 5 million in March. (Responsible for: Gong Fenmei) 
Low-end chip market "price war" ceaselessly
March 19 news, in order to actively position the low-end market, the market rumors that Qualcomm (Qualcomm) this week for the low-end products started the first quarter of the second quarter price cuts. In this regard, whether its rival MediaTek is following the price cuts has attracted much attention from the market.