LED lighting applications, in order to achieve the brightness requirements close to the original alternative light source, usually adopt a design method of winning by "quantity", that is, designing a large number of LED light-emitting components per unit area, or designing to improve the luminous efficiency of a single component. However, the temperature of the surface or the point component is not required to be processed, and the heat dissipation method can be carried out by active or passive design, especially the design of active heat dissipation is more complicated, how to achieve optimal heat dissipation design. Avoiding the light decay of LED components affects the life, is an important key to the development of high-brightness LED lighting... LED (Light Emitting Diode) solid-state lighting is a future industry that is considered to have great potential in recent years, because consumers and industry are looking forward to using LED solid-state lighting to solve a lot of energy waste in inefficient light source lighting problems, precisely because of LED With the advantages of small size, high luminous efficiency, and power saving, most people also have high hopes for the future development of LED solid-state lighting. Figure 1: LED strip light is made of flexible and flexible plastic material joint, which can be used to create a situational auxiliary light source design. Figure 2: LED bulbs have limited circuit space available, and can be integrated with power ICs and safety-controlled wafers to reduce PCB size and minimize design requirements. Because LED solid-state lighting is different from the traditional light source technology, it has many advantages in environmental protection and energy saving. Firstly, observe the common daily lighting sources, which are nothing more than incandescent lamps and fluorescent lamps. Incandescent lamps basically perform in luminous efficiency. That is to say, it tends to be inferior. Even if it has the advantages of low cost and established habits, it has become an environmentally friendly and inefficient lighting product under the social atmosphere of environmental protection. In terms of fluorescent lamps, although photovoltaic technology using high-frequency gas discharge to achieve power-saving benefits, in fact, the fluorescent lamp control process can not avoid mercury harmful to the environment, and is not the best light source choice in environmental protection appeal. Supermarket Lighting Led Driver
Supermarket Lighting Led Driver
For Supermarket lightigs, there are various kinds led lights that can apply to supermarket. Our Constant Current LED Lighting Power Supply range offers currents from 100mA to 2000mA; LED lighting power supply high distance lights driver offer high efficiencies, PFC, are available with Class P Input; IP ratings against dust and moisture from IP20 through to IP67 and protection for short circuit, over voltage, overload and over temperature conditions. With additional options such adjustable outputs and PWM, 1-10V, Resistive or triac dimming functions.
Specifically for supermarket light, like the panel light and led tube for long time to used it, flicker free driver with high PF Value, led spotlights driver over voltage protection, short circuit protection, open circuit protection. SELV satety output design.Because the supermarket 24 hours to use, so the power supply life requirements are high, are generally 50,000 hours, at least 5 years warranty.
Parameter:
Input voltage: 100-277vac / 100-240vac / 100-130vac / 180-240vac / 100-347V
FAQ: High Distance Lights Driver,Led Spotlights Driver,Supermarket Lighting Led Driver ShenZhen Fahold Electronic Limited , https://www.fahold.net
output voltage: 25-40vdc / 27-42vdc / 35-45vdc / 50-70vdc / 12Vdc / 24vdc
current: 100mA-8000mA.
Power factor: >0.9
Dimming:0-10V / PWM / RX / DALI.
>=50000hours, 3-5 years warranty.
certificate: UL CE FCC TUV SAA ect.
What's the benefits of Fahold Driver?
Q 1:Are you a factory or a trading company?
Answer: We are a factory.
Q 2: Payment term?
Answer: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment
can be negotiated.
Q 3: What's the main business of Fahold?
Answer: Fahold focused on LED controllers and dimmers from 2010. We have 28 engineers who dedicated themselves to researching and developing LED controlling and dimming system.
Q 4: What Fahold will do if we have problems after receiving your products?
Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we will do our best to solve any of your problems with our good after-sale service.