DVD burner can burn and not read discs 1. Perhaps after the system is installed with Nero, the CD burning function of Windows is disabled. Click Start to run, enter services.msc, open the service, double-click the IMAPI CD-Burning COM Service service, change the startup type to automatic, and restart. 2. Open My Computer, open the drive properties of the recorder, in the Burn tab, check Enable CD recording on this device. In addition, if the burner and hard disk use the same data cable, or install two burner \ optical drive, the above problems will also occur. It is recommended to use a separate data cable for the recorder and hard disk. If it is a dual burner, because Windows can only open "Desktop CD Recording" for one of them, and the other is in a non-opening state, (you said, it is a dual optical drive, obviously it is your old optical drive as a burner Put in the burning disc in the non-opening recorder, Nero will not be activated automatically, double-click to enter will prompt that the function is incorrect, as long as you select "Enable CD recording on this device" on the recorder, you can say The problem should be a hardware problem. First of all, can you be sure that you can't read the DVD, because you have to wait for a long time, and if it's not time, you can't wait. LED Lighting Aluminum Alloy Die Casting Led Lighting Aluminum Alloy Die Casting,Oem Aluminium Alloy Die,Led Zinc Die Casting,Aluminium Led Light Housing Dongguan Metalwork Technology Co., LTD. , https://www.diecast-pro.com
And are you sure you are a DVD burner? The CD burner may be a CD burner.
How many times do you use to burn, it is recommended to use 4-6X speed burning. If there is any problem with the speed around 4X, it is estimated that the optical drive needs to be repaired more likely.
Reinstall the system and driver, basically solve the problem