On May 25th, 2012, the sixth station of the National Engineering Tour Symposium for High-tech LED Indoor Lighting Design - Chengdu Station, successfully concluded at the Emei Hall on the fifth floor of Chengdu Garden City Hotel. In this seminar, we received strong support from Chengdu Building Decoration Association, China Railway Second Bureau Decoration Design Company, and Tianfu Lighting City, the largest lighting city in Southwest China. At the same time, we also invited nearly 110 local designer representatives, representatives of engineering companies and dealers to participate in this seminar. Tan Jian: The future LED competition "design is king" Electronic Components Resistor
Resistor (Resistor) commonly known as resistance directly in our daily life.It is a current limiting element. When the resistance is connected to the circuit, the resistance value of the resistor is fixed, usually two pins.Fixed resistors are those whose resistances cannot be changed.Resistance variable is called potentiometer or variable resistor.The ideal resistor is linear, that is, the instantaneous current through the resistor is proportional to the applied instantaneous voltage.Variable resistor for partial pressure.On the exposed resistor body, one or two movable metal contacts are pressed tightly.The contact position determines the resistance between any end of the resistance body and the contact.
Flat tube resistor
Electronic Components Resistor,Metal Film Resistor,Metal Oxide Film Resistor YANGZHOU POSITIONING TECH CO., LTD. , https://www.cndingweitech.com
Ms. Zhang Daiying, Executive Chairman of Chengdu Building Decoration Association, and Mr. Wang Yinxi, General Manager of Tianfu Lighting City, attended the seminar. In addition, Tsinghua Tongfang Product Manager Mr. Jiang Guangjun, Laiwei Photoelectric Tan Jian, Mr. Xie Xiaopei, General Manager of Yuyu Lighting, Mr. Zhang Li, Vice President of Xinli Light Source, and Mr. Zhang Xiaoying, Design Director of Chengdu Multidimensional Design Office attended the seminar and made a wonderful presentation. The following is a summary of the guest speech: 
Jiang Guangjun: Design Principles and Advantages of LED in Villa Residence
The lighting design of the villa house should meet the comfort of the occupants, and try to create a practical and artistic effect living environment. At the same time, it must ensure the quality of the lighting, the input cost is economical and reasonable, the energy saving is obvious, the safety is reliable and convenient. maintain. At the same time, villa residential lighting should pay attention to the individual characteristics of the occupants, according to the different functions of the room and the age difference of the occupants, choose the appropriate illuminance value, create a bright, or elegant, or quiet, or stylish living environment.
When LED is applied to villa residential lighting, it is necessary to use appropriate LED lamps according to the height and use characteristics of each room to achieve the best lighting effect. Some residential living rooms are very high. If you choose large crystal chandeliers, you can achieve the best space decoration and lighting effects; pay attention to wall (vertical surface) lighting to enhance visual comfort; bedroom lighting pays attention to quiet atmosphere and privacy; restaurant lighting is bright and elegant The atmosphere of the scene can be changed according to the different meals; the kitchen and the bathroom pay attention to the functional requirements, and the appropriate illumination value is given while paying attention to the hidden lamps; a large number of LED light sources are used, and the low temperature and low voltage ensure the safety of the indoor electricity.
The use of LED for villa residential lighting design has the following advantages: it can achieve energy saving of more than 50%, and the economic benefits are remarkable; LED lamps are combined with points, lines and surfaces to cope with various indoor demands; small size, uniform light output and convenient installation. It can cater to interior decoration; low temperature and low pressure to ensure safe use of electricity; long life and greatly reduce maintenance costs. 
Laiwei Photoelectric has always only focused on LED commercial lighting, and only focused on high-quality LED commercial lighting. Tan Jian mentioned that with the expansion of LED commercial lighting applications, the involvement of international manufacturers, and the decline in product costs, the technology is becoming more and more mature, and using excellent product design to create an extraordinary business environment will become the future LED. The focus of industry competition.
With its own team of designers and advanced die-casting equipment, Laiwei Optoelectronics can provide reasonable product design and design according to the needs of customers and according to the actual needs of the business environment. At the site of each seminar, Laiwei Optoelectronics has attracted the attention of many designers and distributors with its unique design.
Tan Jian believes that the current LED lighting companies have a weak awareness of product design, resulting in similar appearance on the market, with no features at all. As long as the LED luminaire can be lit, the color is positive, the color rendering index is good, and with a little bit of innovative design, it can be sold. But in the next three years, if the lighting design is delayed, the company will be difficult to survive. 
Metal aluminum shell resistor
Stainless steel resistor box
Crowbar (wind power converter) resistor
RX21 Glazed Wirewound Resistor
RX21 Glazed Power Wirewound Resistor
Inverter ceramic resistor
Resistor Cabinet
Resistive load box
Ultra-thin aluminum shell resistor
High power resistor
water cooling resistor
RI80 high voltage resistor
RX20 High Power Painted Wirewound Resistor
stainless steel resistor
Howo resistor
KNP Porcelain Rod Painted Wirewound Resistor
Cement Resistor
Thick Film Resistors
